Varnish offers a fabulous finish to many items. The best way to apply varnish is to let your paint completely dry first before putting on the varnish. One coat is all that is needed. If you want more than one coat, you have to let each coat dry first before applying the next one.
Prepping Wood for Varnish
Sand your wood. This eliminates any blemishes and imperfections before putting on the varnish. Use grit sandpaper for rough pieces, working with the grain of the wood. Sand softly until the article is smooth.
Have a Clean Work Space.
Varnish is durable and incredible finish. However, it is susceptible to hair, dust, and other pollution before drying. Varnish your item in a space that is thoroughly clean.
Get all your varnishing supplies together. You’ll need a couple of essential supplies to varnish wood. You should have:
Carefully stir the varnish. Don’t shake the varnish container. Open it carefully. Use your stick to mix the varnish, working gently and slowly completely. You don’t want air bubbles in your varnish.
Thin your varnish. Put enough varnish for the first coat into the measuring cup. The exact amount will differ based on the size of your piece. It’s a good thing to begin small since you can always add more. Add some paint thinner and stir.
Lightly apply the varnish. Place just the tip of your brush into the thinner-varnish mixture and carefully use it on your piece.
Don’t just brush back and forth. Apply along the direction of the wood grain. Begin in a corner and varnish a one-foot square. When that is done, move your brush and varnish the square right next to it. Repeat until the whole surface is completed. For a professional look or if you don’t feel like dealing with all the mixing and whatever, ask a Rochester painter to do it for you.
An affordable and straightforward way to renovate your space is to apply some new color to your walls. Did you also know that you can paint to make a room look bigger? It’s a lot simpler than it sounds. The results will have you in love with your living space once more.
When attempting to making your room look bigger by painting it, there are a few things you should keep in mind, such as how the various colors for your room come together, your paint color choice, and the shine level of your paint choice.
Lighter colors will liven up your space and make your walls look wider. Reflective surfaces reflect light and scatter it all over your room, making it feel more expansive. Specific color combinations work in unison to open up space.
Below are some simple suggestions to assist in enhancing the size of your space. For more help, call a company that specializes in interior painting in Rochester.
PICK BRIGHT COLORS
It is a fact that light colors aid in making your space appear more prominent and bright colors do this as well. Choose a clean-looking color instead of one that looks muddy. Select a light color like pale pink.
WHITE MOLDINGS INCREASE DEPTH
Paint your moldings and trim white. This will assist in bringing depth to your room, making your walls look further away. For a contemporary look, use high-gloss white paint.
PICK COOL COLORS THAT REFLECT LIGHT
Experiment with an icy blue or light cream color scheme. The cool blue will reflect light to make it look larger while bringing warmth to your room.
UTILIZE TOP-QUALITY PAINT
The quality of the paint you utilize is crucial. Low-quality paint usually has a chalkier feel and look to it. This makes your room appear littler. Select a color with some shine. Don’t paint it all with a high-gloss on. Just make sure the paint you pick has a bit of shine in it. You want it to reflect some light.
Utilize satin or eggshell on the walls and a high or semi-gloss paint on the moldings and trim. Stay away from colors like dark blue, red, dark purple and anything that has any brown or grey in it. These colors might make your room feel cozier, but they don’t reflect light and make your room look bigger.
Priming isn’t always needed in every paint job. To answer the question should I prime before I paint, you first have to know what types of primers on the market and what they should be used for. The best way to recognize their planned uses is to look at them by their categories.
Priming before painting can be a puzzling question, because it is not always needed even though painting services in Rochester, NY suggest that you always prime. Frequently, your answer will be less based on objective reasons than on subjective ones: cost, attitude, and patience for a painting task.
Primer is an application that you put on the wall before painting. It seals the surface, so the paint sticks to the surface instead of seeping into the wall.
The 411 on Whether to Prime or Not
If you’re painting drywall that hasn’t been painted before, it needs to be primed first. If you have touched up numerous cracks and filled in several nail holes on a wall, you should prime the spots you have covered with putty or the wall before painting it.
If you’re painting a space that hasn’t been painted in a long time, it’s a good idea to prime it before painting. If you want, you could also give it a good washing.
If you’re putting flat paint on a wall that earlier was painted with a semi-gloss or high finish, first apply a layer of primer. You can also give the wall some texture by using sandpaper or give it a good scrubbing with TSP cleaner before putting on some primer. The flat paint won’t stick to the wall if you don’t
If you’re altering the color of your wall from dark to light, priming it first will make it simpler to apply the lighter paint and could stop you from having to use any more coats.
A suggestion from Rochester painters is that you ask for a touch more of umber be added to your primer. It should be a light gray color and helps to see the flaws on your wall. This way, you see what spots needs smoothing before the paint is applied.
Painting a dark colored wall with a light color paint without priming it first necessitates several coats of paint. Even painting one dark color over another one, such as painting deep purple over dark red, can be hard. By using only two coats of primer, though, you can cover a dark color with a light color or even white paint with just a few applications.
Besides lessening the amount of paint you apply, priming dark color walls help you get the precise color shade you want. Without priming, some of the dark color can soak into the new paint, creating a blotchy look or making a different color than you desired. You will find several different types of primer on store shelves. Be sure to buy the one that is recommended to use for a severe color change.
Pick a primer labeled “high hide.” These products are equipped to conceal very dark colors. Inspect the label for the amount of titanium dioxide. Paint products that have large amounts of this mixture are the top choice for hiding dark paint colors.
Get the surface ready for priming by washing the areas with a mixture of all-purpose cleaner and water.
Take off loose paint with a putty knife. Fill all the imperfections and holes with spackle. When dry, use sandpaper to sand the repaired spots. Wipe off the dust using a damp cloth. Use painter’s tape to shield the edges of the windows, floorboards, ceilings and other trims you want to keep paint off.
Paint a strip of primer next to the painter’s tape and in the corners with a small brush.
Use primer on the central part of the walls with a paint roller. For top results, put on two thin coats of primer instead of one thick coat. Stick to the directions on the primer about the amount of drying time needed between coats. Don’t stress if the dark paint still shows even after a couple of primer coats. Let the primer completely dry before painting.
You can also get a pre-tinted primer or ask a paint contractor to tint the primer, matching the hue of your paint, and do the job.
You might be wondering what in the world is chalkboard paint. It's paint that you can put on any surface that will convert the surface into a usable chalkboard. You can erase and draw on it just like your standard chalkboard.
Okay, now that you know what it is, you might be wondering what you do with it. Well, here are some tips about the do’s and don’ts of using chalkboard paint.
Reasons for using chalkboard paint:
Reasons to “pump the brakes” on using chalkboard paint:
Planning and Time: you will have to use at least three coats of paints, and you have to wait until each layer dries before applying the next one. After the last coat of chalkboard paint, you have to wait a week before you can get creative.
Don’t go full throttle: you should start with just using the chalkboard paint to accent your walls before doing all the walls in a room
Cost: chalkboard paint isn’t cheap. If you are considering chalkboard paint spray, you will be spending even more money.
Allergies & Dust: If you or anyone in your house has asthma or any respiratory problems, you want to consider this before you begin the job. Being allergic to chalk dust is real and chalk dust drifting in the air is an irritant.
Damage and Repainting: chalkboard painting necessitates many layers. To change your walls back, you must strip the walls with sanding.
Preparing your Walls for Chalkboard Paint
Start by applying tinted primer to the area, making sure the primer closely matches the color you’re using. Chalkboard paint is available in an assortment of colors. Make sure to prime with the best color match you can get.
Then, apply a layer of chalkboard paint. Allow it to dry and reapply until you have the color hue you desire. If you need more help, call a painting contractor in Rochester, NY for assistance.
Bring your living space some energy with a vibrant new hue!
Painting your front door is one of the quickest, simplest, and most economical ways to truly remodel your house. All you need is a couple of days to do the job. If your painting skills aren’t that great, contact a company that specializes in home painting in Rochester, NY to do it for you.
Before you apply a quart of your favorite paint shade, check to make sure you’re prepared. A lot of successful front door paint jobs are due to good prep work. Read on for some tips to paint your front door.
Take Your Time…Oh and Pick the Right Color
Take your time picking the right shade you’re about to use on your front door. Be sure to think about how the color works with the light at various times of the day. This is also the time to choose your finish.
Set a Good Time
It doesn’t matter if you prop it open or take it off, you want to paint your front door on a good weather day so it can accurately dry and your home is comfortable. Fall and spring are best. You want to make sure it is a rainy day. A sweltering day is also a no-no. Too much sun will make the paint blister.
Get Your Door Ready
If you have the tools, space, and patience, remove your door from the hinges and put it flat on sawhorse or table. You can paint your front door while it is still intact. You want to make sure to cover the hinges and other parts in painters’ tape. If you want to, you can take off the knob and other unpaintable parts.
Lying it flat stops the paint from running and dripping. After painting, you should prime, clean, and sand the door. This guarantees you get the real color and no dust clumps.
Always wait until every layer dries before applying another one. Make sure not to close the door until it’s dry. We recommend you begin the project in the a.m. so that you can close your door at night. If you close your door before it is totally dry, your door will get stuck, and all that work is wrecked. If you're not sure where to start, call Rochester Painting and we'll get you started.
When the weather begins to get cold in Rochester in the fall, this is a sign that winter is coming quickly. Ahead of those blowing cold winds, there are some easy ways to winterize your home. You might also want to jazz up your home for the winter holidays. If so, contact a business that specializes in interior painting.
Getting your home ready for winter makes your place more energy efficient, so you and your loved ones can be toasty and warm without paying pricey energy bills.
It doesn’t take a lot get your home ready for winter. Just a couple of days is all that’s necessary to winterize your house correctly. Below are some suggestions on what you can do to guarantee that you have a secure and warm home this winter.
Get your furnace inspected by an HVAC specialist
Before you cut on your heat for the first time this winter, let an HVAC expert check it and fix any problems. This heating & cooling professional will make sure your furnace is running safely and effectively. Also, you should get your ducts inspected and clean while the expert is at your home.
Prune any trees nearby
If you have any tree limbs near your windows, driveways, or roof, prune them. If not, ice and snow will put extra weight on them and make them snap. For instance, there can be a severe ice storm in Rochester. You have your car parked in your driveway. If a large branch has a vast amount of ice built on it, it will break and smash in the roof of your car. This can all be prevented if you take a precaution and get your tree pruned.
Your A/C in the winter
You’re most likely won’t be using you’re A/C in the wintertime. Even so, you should take steps to protect it, so your unit stays working a long time. All you have to do to winterize you’re A/C is to drain the hoses or pipes. You don’t want them to freeze in the cold temps.
Another thing you want to do is to vacuum out any water you have in the drain pan of your A/C. Lastly, put a cover over your air conditioning unit. This will prevent rusting and keep the snow out of the unit.
Water stains on your ceiling can radically reduce the resell value of your property, not to mention horrible to look at. It doesn’t matter if you’re doing some home renovations or planning to relocate, the way to remove a water stain on the ceiling can be easy and affordable.
Source of the water. You may see a noticeable leak coming from the floor above or a pipe, but it can be hard to pinpoint. If you don’t find the source of the water before removing the water stain, the issue will keep returning.
Be sure to wear a dust mask, gloves, and safety glasses when you are searching for the water source and to remove the water stain. You should also be aware that due to the longevity of the water leak, you could have mold. If there is mold present, it’s best to use professional painting services to get rid of it safely.
Get rid of damaged drywall. Contingent on the extent of the damage, you might need to take out some or complete sections of your drywall.
If you need to take out a small part of the ceiling, a keyhole saw is typically used to eliminate the affected area.
If the damage is terrible, you might need to use a crowbar or a hammer’s claw end to detach all the marred material.
You should make sure that all the stained drywall is taken out and that any remaining material isn’t sagging and completely dry.
Wash the area. Wash with a household cleaner to make sure that mold and mildew don’t grow.
Fix the hole in the drywall. After all the affected material is gone, replaced it with new drywall. Cut a piece of drywall that is the same size as the spot you took out of the ceiling.
If the spot you are replacing is little, just put the new piece of drywall into the hole and use a joint drywall compound to put in the hole and work like glue, so it remains in place. To flat the mixture and make it even use a putty knife. After the spot completely dries, use sandpaper to even it out even more.
If you find that the repair project is going to be more difficult that you have planned, call Rochester Painting today and we'll help you out!
Concrete is a sturdy material for an outdoor patio. However, regular concrete can look dull and drab in your outdoor space. You can paint a concrete patio, but it needs special attention. Patio painting can bring some unique issues. But if you take the right steps to remove the problems, you should have a stress-free patio painting event that won't cost you extra money or time.
Get ready to stain or paint your patio for a new look!
Because you’re painting a patio (an outdoor surface), you can’t use any old type of paint. Regular exterior paint will crack on a concrete surface and come right off after being applied. Many paint types work on outdoor concrete types of paint that will work on your outdoor concrete patio:
Concrete paints that are waterproof and have sealants. This paint type is made to resist grease, oil, water, and salt. This is a solid paint choice since it's purposely made for outdoor concrete surfaces and can endure the elements and numerous substances.
Water-based, oil-based, or latex exterior paints that are crafted for patios. These paints are an ideal choice since they are made for exteriors and can tolerate foot traffic.
Masonry paints that contain additional epoxies and binders. Even though it bonds terrifically with concrete surfaces, it won't shield your concrete patio from the elements.
Staining concrete is a simple, quick way to renovate your dull-looking patio into a colorful and energetic surface that will make your yard more inviting. The stain is foolproof to use. You wet the patio and apply the stain. If you’re not satisfied with the results, you can go back and put on a second or third coat to enrich the color.
You can put the stain over broken concrete, but don’t expect it to cover your patio magically completely. You can still see the old drab color through the stain.
Don’t feel like being bothered with this project? Reach out to a painting contractor in Rochester, NY if you have any questions or you want an expert to manage the task.
No one wants to spend time watching paint dry. Residential painting is typically a big project and best finished before you move in. If you don’t have a lot of time and want to get your rooms painted swiftly, there are a few ways to make paint dry faster. While there's no simple way to dry an entire room, Rochester painters do have some suggestions.
While it may be tempting to try to apply as much paint as you can at one time, using thinner coats will aid your color in drying quicker. Also, using multiple coats look better than putting on one very thick one because it gives a more even appearance. Don't wait for your first coat to dry before applying the second layer.
One Wall at a Time
If you concentrate on painting one wall at a time, you’ll give your other walls time to dry. You’ll see that by the time you’re done with the last wall, the first one is dry and all set for a second coat.
Heater or Hair Dryer
If you need to quick-dry paint on walls or furniture, using a hair dryer speeds up the process. Put the hair dryer on the spot that is drying too slowly. Put the tip of the dryer around two or three inches away from the surface, so there is no blistering. Slowly circle the dryer over the wet area until it’s dried.
This method works well on a piece of furniture that you're giving a unique paint finish. Instead of waiting around for each application of paint to dry, you can hurry up the job and move on to the next coat of paint.
If you're doing a crackle finish, a sort of finish which looks cracked on purpose, you should know that the dryer heat makes the cracks larger. Use caution with this method since overheating causes the paint to chip.
If you’re unsure about our painting skills or you don’t feel comfortable using heat on painted surfaces, get in touch with a professional home painting business.
This blog is devoted to painting ideas and tips from Rochester Painting NY, give us a call and we will make your ideas into reality!