Painting is a home renovation that everyone has done at least one time. Even though it's straightforward to do, paint storage is something of fine art.
There's a possibility that you aren't storing paint right. Because leftover paint is so customary, you most likely have gallons of it. Moreover, paint is pricey, so it's worth it to take the correct provisions and store your paint the proper way so that it doesn't lose its color.
Regardless if you're an occasional painter or want to become a painting expert, below are some tips to retain the freshness in that leftover paint for as long as possible.
Paint Storage Tips
A useful paint storage tip means keeping the paint out of a shed or a garage that gets humid and hot during the summertime and very chilly in the winter. When paint gets hot, it dries up. When paint gets cold, it separates and curdles. Also, the wetness from humidity rusts paint cans.
With that said, store your paint in a dry, cool place. A utility room is an excellent place. It is usually cold and dry.
Seal Up the Paint Can as Best as Possible
Paint stores excellently when it's sealed in an airtight can. Luckily, paint cans can do this on their own. However, numerous folks compromise this at the beginning when they try to open the lid.
When opening a paint can never use a screwdriver. You can ruin the lid and mess up the airtight seal when trying to put the top back on the can. It's best to use a paint can opener for opening paint cans without denting them.
Recognizing If Paint Has Gone Bad
If you didn't do an excellent job of accurately storing leftover paint, you might be curious about whether the paint has gone bad.
Smell it. If the scent is anything other than how paint normally smells, it's possibly bad. You can also try mixing the paint to see if the paint comes together quickly. Try brushing some on a test surface, seeing how it spreads. If there are bumps and roughness, throw the paint out.
If you have more questions about storing your paint, call us at Rochester Painting.
Learning how to paint bricks, regardless of the exterior or interior of your home, is a budget-friendly way to update your look. However, before you begin, prep work is necessary.
Reasons Homeowners Learn How to Paint Bricks
Techniques to Follow to Ensure Color Success
Step 1: Clean the Bricks
Dirt usually comes off with soapy water and a stiff-bristled brush. If the dirt is deep and embedded, use trisodium phosphate (TSP). A half-cup of TSP put into a bucket of water should get the job done.
If you come across any mildew, apply mixture water and bleach, letting the solution stay on for an hour. Afterward, use a wire brush to scrub the area. Never use acid to clean bricks.
After cleaning, wait a day to start painting.
Step 2: Apply Primer
Based on the area of the surface, you want to paint, apply a layer of latex primer. Put extra coats on those areas that have been affected by mildew. Allow the primer to dry completely before doing anything else.
Step 3: Choose Your Paint
Many paint professionals prefer the use of elastodynamic paint for brick. It has a high level of elasticity, making it ideal for stopping and filling cracks. Also, elastodynamic does well in any weather.
If you can't find elastodynamic paint, use regular acrylic latex paint. Acrylic latex paint is the best choice for exterior bricks. This paint type withstands mildew and rapidly vaporize any water that it absorbs.
Step 4: Apply Paint
The simplest way to paint brick is with a paint sprayer.
If you're painting a brick fireplace, paint rollers or brushes are enough. For individuals who possess no painting experience, these tools are the best. Pick a paint roller with a thick nap to guarantee excellent results. Several painting contractors suggest gloss or semi-gloss paint for painting exterior and interior bricks. This paint type showcases details and is easy to clean.
Reach out to us at Rochester Painting for more brick painting tips.
How to Stain Your Fence: How Often?
When it comes to fences, moisture is the enemy. How often to stain your fence is mostly determined by the weather. In rainy regions, you might need to do it more often. Dry areas might necessitate less regular maintenance.
Many painting contractors suggest staining a fence every two years. A better way to decide your need is to inspect for beading. If water doesn't bead on a stained fence, it might be time for some maintenance work.
Types of Stain to Use
There is some dispute on whether you should stain a fence. Staining shields your fence from wear and tear, adverse weather, and insects.
Staining could be more costly. The stain might cost less than paint, but you most likely need more of it to do the task. On the other hand, using a stain product such as Thompson's WaterSeal works better. Stain gets into the wood a lot better than paint. With staining, the color fades over time instead of peeling and chipping like paint. Nowadays, the stain comes a host of hues and tones.
Before You Begin
Working with a friend helps the job go quicker. Be sure that the stain you pick is top quality for a lifetime finish. If you are on a budget, decide what you need as far as materials and equipment.
Take a look at the weather for the best time to start the job. The best time to work on your fence is when the weather is between 40 to 90 degrees.
Always wear a face mask and gloves when using staining. Call us at Rochester Painting if you have any questions about fence staining.
Your walls are shining with a fresh coat of paint. Three days later, you remember you didn't clean your paintbrush. Blame the kids, the chaos, the fact that you don't have to be elderly to forget the obvious. Regardless, don't throw your paintbrush away. Learn how to clean dried paint brushes, saving you from spending money on a new one.
Cleaning Your Paint Brush
Paint usually build up close to the metal band, referred to as the ferrule. To clean the bristles, use warm water. However, most home painting professionals advise against using soap. Instead, use a solution of ½ of fabric softener mixed with a gallon of lukewarm water. Fabric softener reduces the surface tension between solids and liquids, making the water "wetter."
If your brush is still full of gunk, try soaking only the bristles in hot vinegar. Put your paintbrush bristle-down in a heat-resistant jar and put in boiled white vinegar. Allow the brush to soak until the vinegar is room-temperature, and then rinse thoroughly.
If your paintbrush is in bad condition, use paint thinner as a last resort. Use a jar with a lid and cut a gash in the top of the paintbrush. Push the brush through the lid, so the ferrule is secure. Pour paint thinner into the jar until it covers the bristle tips.
Leave the brush in the jar for a few days. As the paint thinner vaporizes, the fumes go through the bristles, softening the dried paint. When through soaking, take the brush out and with a plastic comb, brush thoroughly to get rid of any loose bits of paint.
Paint Brush Cleaning Tips
For more information on paintbrush cleaning, ask Rochester Painting.
Picking colors for your next paint job can indeed occupy your time. Yet, to get an utterly smooth coverage, you'll need to put some thought into the types of paint brushes to use as well.
While many folks choose rollers for large surfaces such as walls, a brush uses less paint while offering precision and versatility. A paintbrush delivers textured and smooth finishes. Most painting contractors in Rochester, NY, rely on brushes to paint trimming and other work, such as painting furniture.
The Making of a Great Paint Brush
Brushes are made of various materials and offered in different sizes and shapes to suit specific jobs. Here's how to decide what's right for your project.
Paint Brush Material.
The bristles of a paintbrush come in two categories: natural, best for oil-based paints, and synthetic, best for water-based paints.
Natural brushes have animal hair. The fibers absorb more paint, producing a smooth finish. Use a natural bristle brush when applying topcoats and oil-based paints. When applying furniture wax, you'll get great results using a natural, round bristle brush.
Synthetic brushes consist of a blend of polyester and nylon. These brushes are best for water-based (latex) paint. They also are recommended for use with acrylic latex-based paints.
Both synthetic and natural brushes can last for a long time if cleaned and dried completely after each use. Please get rid of any excess paint, wash and rinse the brushes, letting them dry on a flat surface.
Paint Brush Style
There are three fundamental styles of paintbrushes, each one made for a different surface and purpose:
A four-inch square-cut brush is perfect for flat, massive exterior and interior surfaces. Use a sizable square-cut wall brush for painting siding, doors, and walls. With a good quality square cut brush, you don't need rollers.
This brush paints window sashes excellently. Also, this brush is ideal for painting panels, corners, grooves, and edges. Paint the trim behind the toilet with an angled sash brush.
These smaller brushes are the best paint brushes for ornamental painting and painting furniture, such as table legs and chairs.
Go to Rochester Painting to buy all the paintbrushes needed for your next paint project.
Painting furniture ideas are all over social media. However, chairs and tables aren't the only things that deliver style and color. You can also paint your refrigerator. Regardless if you use spray paint or a roller, learning how to paint a refrigerator is easier than you'd think.
Picking the Right Paint
Depending on the condition of your fridge, you may need just a bottle of paint for touch-ups or a whole can of paint for total coverage. For long-lasting results, pick a paint that's right for your job.
For covering nicks or discolorations, appliance epoxy paint is excellent. The paint application comes in spray form or with a brush. Standard appliance colors are available.
You might want to paint your refrigerator another color besides the standard white or black. Consider using standard spray paint, followed by a layer of clear enamel gloss protective spray.
Getting Ready to Paint Your Fridge
Place a drop cloth under the refrigerator. Painting is a messy job, and you don't want to ruin your flooring. Laying down a drop cloth protects against drips and stains. You can buy drop cloths at any home painting or hardware store. If you don't have a drop cloth, use an old sheet, tarp, or trash bag.
Be careful, trying to lift your fridge. Get someone to help you, or lift one corner at a time, placing the cloth beneath it.
Clean the outside of the fridge. Any dust or grime left on the exterior will mess up the paint and stop it from going on smoothly. Use a microfiber towel or damp cloth to wipe the top, front, and sides.
Allow the refrigerator to air dry. Don't wipe it with a towel since it leaves lint behind. To clean out the nooks and crannies, removing any food particles, use an air compressor.
Refrigerator Painting Time
Now, you're ready to paint your refrigerator. A fresh coat of paint brightens any surface. So, a layer of stainless steel or a brush of bold color completely transforms your refrigerator. Painting your refrigerator covers up any scratches, updates the finish, as well as extend its lifespan without breaking the bank.
Reach out to Rochester Painting to get more tips on painting refrigerators.
Kitchen tables get battered over time. Regardless if you have children digging their forks into the table or eating dinner every day with plates scraping the top, the table gets abused. Learning how to paint a kitchen table easily turns it into a beautiful new piece. It is cheaper than buying a new kitchen table, and you can make it exactly how you want it.
Choosing a Color for Your Kitchen Table
If you're not sure about which color to paint your table, do some research online or speak with a home painting expert. A white kitchen table looks lovely in a kitchen, though a table painted in a bold color makes a statement. Decide on the ambiance you're seeking in your kitchen. Then, pick a color that helps you get that look. Some colors to consider are navy blue, yellow, red, and turquoise.
Time to Paint Your Kitchen Table
Before you start painting, you need to sand the surface of the table. Sanding creates a smooth exterior for the paint. An orbital sander comes in handy here, smoothing the surface quickly.
After sanding, apply primer to the table. If you're repainting a very outdated table, you need a primer that covers wood stains. For more protection, put on two coats of primer. Allow the primer to dry for 24 hours. Afterward, use a medium grit sanding paper to even any rough patches. Use a spray-on primer for hard-to-reach spots.
When you're ready to paint, be sure to use top-grade, water-based enamel paint. This type of paint provides a hard finish, that's just like oil paint.
All kitchen tables take a beating. So, you'll need a paint that can deal with objects banging on it all the time. Paint on a couple of coats, making sure each one dries before applying the next one.
Once the painting is complete, put on a coat of furniture wax or water-based polyurethane to protect your table. Last but not least, take pleasure in all your hard work and enjoy your enhanced piece of kitchen furniture.
If you're searching for new ways to redecorate your eating area, but don't have a lot of money to spend, look at what you can accomplish with what you have. Painting your kitchen table is the perfect way to update your look. The best part is that this DIY project takes less than a week.
Contact Rochester Painting to get more kitchen table painting ideas.
Plants are the perfect decorative addition to any room in your home. While it may be challenging to find the right containers to complement your décor, don't let that stop you. Painting terracotta pots is the simplest way to make custom flower pots that are just your style. Here's everything required to create your own.
Materials Needed for Painting Terracotta Pots
The best thing about this task is that the paints and tools are low-cost and available at most businesses that offer painting services. For the price of one decorative planter from a well-known home store, you can make two of your own. Here's what you'll need:
Coming Up with a Painting Plan
As appealing as it is to begin this project with a childlike sense of wonder, you shouldn't do it. It would be best if you determined what colors you want to use. It would be best if you thought about what you want to paint on each pot before you even begin. Also, don't forget that a beautiful color palette helps tie the complete look together.
Unless you're amazing with a paintbrush, use guides to produce straight lines for your designs.
Apply the Paint to Terracotta Pots
When applying paint to the pots, make sure to wait for each coat to dry before applying the next layer. Here is some advice on the paint:
· Light colors require more coats to cover the terracotta.
· A foam brush works excellently for vast surfaces since it helps reduce brush strokes.
· When you're using painter's tape, remove it while the paint is damp. If it dries, the tape can pull little pieces of paint off with it.
Tips for Painting Terracotta Pots
Try painting an old terracotta pot. First, soak the pot in warm water for two hours. If the container is soiled, add bleach to the warm water. Rinse thoroughly. Make sure the pot is completely dry before putting on any paint.
· Use thin, light coats when painting. Applying thick layers might result in dripping and pooling.
· If you're using spray paints, be sure to work in a well-ventilated area.
· Don't paint over the holes at the bottom of the pot. Without correct drainage, plants are susceptible to rot.
To find out more information about painting plant containers, call Rochester Painting.
With metal furniture, you deal with rust and chipped paint and rust, making it look cheap and dingy. But you can make it look fabulous again. Painting metal furniture necessitates the same technique used with outdoor furniture, making it the quickest and easiest way to update your home's appearance.
Steps to Painting Metal Furniture
1. Take the furniture outside. If you must work indoors, be sure you have enough ventilation by turning on the exhaust fans and opening all the windows. To avoid breathing in the paint fumes, wear a painter's mask. It would be best if you also put on rubber gloves and safety glasses.
2. Put the furniture on top of a tarp or drop cloth. Wash the furniture thoroughly to remove any dirt, grime, or dust.
3. Rinse and dry the furniture. Apply a layer of turpentine or vinegar to the metal furniture to get rid of any oil or grease. Allow the furniture to dry for 40 minutes.
4. Sand the metal if the paint is bubbled or chipping. With fine-grit sandpaper, sand the metal until the surface is smooth. Clean the dust off the metal.
5. With newspaper or plastic, conceal any parts you don't want to paint. Fasten the covering with tape.
6. Spray the furniture with rust-resistant paint or metal primer. Spray evenly with up and down strokes to avoid drips.
7. Allow the primer to dry completely. Since drying times differ, be sure to follow the manufacturer's instructions.
8. Shake a can of spray enamel paint and apply it the same way as the primer.
9. Let the first layer dry completely before putting on the second coat of paint. 11
10. The furniture should be completely dry before using it. Some metal paints take more than 72 hours to dry.
Painting Metal Furniture Tips
Contact Rochester Painting to learn more about metal furniture painting.
Nothing looks more unattractive than discolored wicker furniture. Luckily, painting wicker furniture is a great way to revive tired pieces with just a fresh coat of paint. Please keep reading to learn how to get it done.
The 411 on Painting Wicker Furniture
Durable and lightweight, a solid piece of wicker furniture can last for years with the proper care. To shield the wicker from the elements, don't forget to apply a fresh coat of paint every year.
Regardless if it's a touch-up or a total makeover, use these steps to prep and paint your wicker furniture with ease. Visit your local home painting store to buy all the necessary tools and paint for the job.
Prep Work for Your Wicker Furniture
With soapy water and a sponge, clean the wicker. Afterward, rinse the piece by hosing it down with plain water. Let the wicker air-dry.
Now it's time to prime. Use an oil-based spray primer and apply a few coats to deliver the best possible results. Be sure to wait for the first coat to dry completely before applying a second coat. Primer dries fast, so doing the painting task the right way doesn't take all day long.
Time to Paint
Finally, it is paint time. The best paint to use for wicker is an outdoor and indoor home paint that's durable, flexible, and sticks to the furniture. Apply the second primer coat has dried, apply the paint in two thin layers, making sure the first one completely dries before applying the second one. You might find it easier to paint the back of the furniture first and the visible parts second.
Again, let the paint dry completely before putting on a second coat. Even though the paint might dry within only a couple of hours, give the wicker furniture a couple of days to cure before you start back to using it again.
You'll be surprised by the difference fresh paint makes on your wicker furniture. It makes your wicker look new and attractive. Repeat this wicker refresh work every few years, and your furniture will serve you incredibly for many seasons.
Call Rochester Painting to get more information on wicker furniture painting.
This blog is devoted to painting ideas and tips from Rochester Painting NY, give us a call and we will make your ideas into reality!